Payment & Shipping Terms:
|Loading Capacity:||1~12T||Power Supply:||DC24V/DC12V|
|Accuracy Grade:||III||Verification Accuracy Of Weighing Indicator:||0.02%|
|Accuracy Of Single-Bucket-Weight:||0.5%~1.0%||Accuracy Of Totalized Loading Weight:||1.0%|
High Accuracy Shovel Loader Indicator, Front End Wheel Loader Controller 1~12T With Oil Pressure Sensor
Wheel Loader Controller BST106-N59[B] can be used for the loader working on mining, forestry, landscaping, waste or construction application. With Good stability and accuracy. It has been widely exported to dozens of countries, such as USA, Canada, Chile, Agentina, Russia, South Africa, India and so on. We have full experince on exporting, installation and problem handling. We woud like to give you the best service.
1. Configuration of 1 set Wheel Loader Controller
|Weighing Controller with built-in printer||1 pcs|
|Oil Pressure Sensor||2 pcs|
|Position Sensor||1 set|
|Three-way joint||2 pcs|
2. Photoes of the attachment:
A. Weighing Controller
B. Oil Pressure Sensor
C. Position Sensor
D. Thee-way Joint
3. Technical Specification:
a. EMC design with high anti-jam for industrial environment.
b. DC24V power input with reverse polarity protection.
c. 32-bit ARM CPU with 72MHz & higher arithmetic speed.
d. Dust-proof stainless steel shell with protection level IP65.
e. 640×480 TFT display screen with English display and input.
f. 24-bit ∑-△ADC with internal resolution 1/1,000,000.
g. High sampling frequency 400Hz.
h. Special Anti-vibration Digital Filtering Algorithm for precise weighing, stable display and rapid response.
4. Structure of Wheel Loader
Related Operation Terms:
1. Arm-up: Lift the lift-arm so that the bucket rises.
2. Arm-down: Put the lift-arm down so that the bucket goes down to the lowest position.
3. Bucket-up: Flip the bucket upward to the limit position.
4. Bucket-down: Flip the bucket downward.
5. Discharge: Flip the bucket downward for discharging materials.
6. Shovel: Shovel materials into the bucket.
5. Menu Operation
|【Menu】||Enter Main Menu / Exit.|
|【Ent】||Enter / Save.|
|【◄】||Cursor shifts left. Backspace.|
|【►】||Cursor shifts right.|
|【▲】||Cursor shifts up. Display the previous option.|
|【▼】||Cursor shifts down. Display the next option.|
6. Parameter Setting Operation
|【Set】||Setpoint Parameters Setting.|
|【A-Z】||English Alphabet Input.|
|【Print】/【IME】||Input Method Switch: Number / English / Chinese PinYin.|
7. System Calibration Operation
|4/【Zero】||Zero Calibration with unloading and idle speed.||All Users|
|7/【Z.cmp】||Zero Compensation with unloading and accelerating.||Administrator|
|5/【Cal】||Span Calibration with loading and idle speed.|
|8/【S.cmp】||Span Compensation with loading and accelerating.|
|6/【Mode】||Options: Truck Mode / Mix Mode / Axle Type Mode.|
Contact Person: He