Crane Weight Indicator / Force Measuring Controller Modbus RTU Communication Protocol
|Place of Origin:||China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1pcs|
|Delivery Time:||10-30 working days after got the payment|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||2000pcs per month|
|Power Supply:||DC24V±20%||Accuracy Grade:||III|
|Verification Accuracy:||0.03%||Static Force Measuring Accuracy:||0.2%~0.5%|
force sensor measurement indicator,
industrial weighing systems
Modbus RTU Communication Protocol Force Measuring Controller, Special Anti-Vibration, Easy operating
- Crane [Wheel Crane, Travelling Crane, Frame Crane, Bridge Crane and so on] Overload Protection.
- Sound-light Pre-alarm for Weight High Limit.
- Delay-stop for Weight Higher Limit.
- Emergency-stop for Weight Highest Limit.
- EMC design with high anti-jam for industrial environment.
- DC24V power input with reverse polarity protection.
- 32-bit ARM CPU with 48MHz clock & high arithmetic speed.
- 5 Red LED digital tubes for English&digit display.
- 24-bit ∑-△ADC with internal resolution 1/1,000,000.
- High sampling frequency 640Hz.
- Special Anti-vibration Digital Filtering Algorithm for precise weighing, stable display and rapid response.
- Auto Zero Tracking.
- Load Calibration & Data Calibration.
- Definable AO/COM[Communication Port].
|Display and Keypad|
|Display||5 Red LED digital tubes for English character and digit display.|
|Keypad||4-key keypad for shortcut operation|
|Excitation Voltage/Max. Current 1||DC5V/120mA [4-350Ω loadcells]|
|Excitation Voltage / Max. Current 2||DC12V/100mA for weighing transmitter|
|[mV]Signal Input Range||0~19.5mV [Output Sensitivity of Loadcell: 1.0~3.5mV/V]|
|[V]Signal Input Range||0~2.5V, 0~5V, 0~10V|
|[mA]Signal Input Range||0~20mA|
|Switch Signal Interface|
|DO||2 Relay switches with normally open and normally closed contacts for outputting upper limit and lower limit alarm signals|
|Contact Capacity of Relay Switch||AC250V/DC24V, 1A|
|Digital Communication Interface|
|Connectable||Host IPC/PLC and LED Remote Display|
Operation Interface Diagram
Front Panel Size
Box Body Size
Panel Cut-out Size
1. This products can be customized with our company LOGO and model number?
Yes, If you want to make your company logo or model number, or you want to design the overlay by yourself. Just tell us your requirement, we will make it for you. If the quantity over 50pcs in order, the customization is free.
2. Do you have any discount?
Yes, if you buy large QTY, please send us a email, we will give you a big discount.
3. What terms of payment are available?
We accept T/T, L/C, Trade assurance, Secure payment, Western Union,etc.
4.When will you arrange the production?
We will arrange the production immediately after receiving your payment.
5. How do you ensure good product quality?
We have a complete quality control system, all of our products are fully checked by IQC, OQC departments before shipping to our clients.
6. How long is the warranty period?
The warranty period for our products is 12 (twelve) months.
If the products from SUPMETER are proved to be unable to work normally due to unartificial reasons, and the problems can't be solved by customers under the technical support from SUPMETER, then customers can send the problematic items back to SUPMETER. SUPMETER is RESPONSIBLE to MEND (or REPLACE when necessary) them FREE OF CHARGE.
(Note: if after checking, the returned goods are proved to be in good condition, the trouble is resulted to be caused by improper operation by customers, SUPMETER is IRRESPONSIBLE to bear the shipping & other charges related to the returning.)